We all know that amusement equipment is designed for people to relax and have fun, but if there is no safety guarantee for amusement equipment, accidents may occur. Such examples have been reported by

Views :
Update time : 2024-11-08

With the improvement of current economic conditions, children's playground equipment has also been favored by many parents. Every Saturday and Sunday, they take their children to the playground to play. However, as the person in charge of setting up playground equipment, it is important to pay attention to the maintenance of children's playground equipment. So, how should we maintain it specifically? Below, we, the Huajin amusement equipment manufacturer, will discuss and discuss with everyone. As children lack awareness of safety and hygiene, it is necessary to provide a place for amusement equipment to do a good job:

1. The soft sponge part can be cleaned with a soft cloth dipped in soapy water, or placed in sunlight for disinfection.

2. After diluting and soaking the plastic parts with fiberglass, soap water, disinfectant laundry detergent, bleach powder, etc., wipe them with a soft cloth or brush, rinse them with clean water, dry them with a cleaning cloth, or dry them in the sun. Finally, spray 84 disinfectant to disinfect.

3. The wooden parts that are resistant to moisture, heat, and do not fade can be washed with soap bubbles, dried in the sun, and then sprayed with 84 disinfectant for disinfection.

4. When cleaning the electrical components of the circuit, the first thing to do is to ensure that the power is turned off, and watering is prohibited. Generally, a damp cloth is used to scrub, and after it dries completely, the power is connected.

5. If it is an indoor activity room, floor, wall, etc., it should be disinfected with ultraviolet radiation daily and the room should be ventilated regularly. Spray and disinfect with hydrogen peroxide once a week.

6. All amusement equipment, outdoor slides, and drill pipes should not have accumulated water after rainy days. If there is, a 4mm diameter hole should be drilled at the lowest point for drainage.

7. If rust removal is required for metal parts, a brush can be used to remove floating rust, and a dry cloth can be used to wipe it clean; After being exposed to sunlight, you can buy some colorless Sanhe brand self spray paint and spray it at a distance of about 20 centimeters while sweeping. After it dries, spray it again for protection. Clean, sun dry, and disinfect the paint after it is completely dry.

8. Of course, while disinfecting, it is also necessary to check whether the connecting parts are firm, whether the metal frequently moves, whether the connecting parts are lubricated, and whether the circuit appliances and ordinary components are damaged.

The above are some points that we, Huajin Amusement Equipment Company, have analyzed for you regarding the maintenance of children's amusement equipment. If you have any other questions, please feel free to call us at any time.


Related News
Read More >>
The places and regulations for The places and regulations for
11 .08.2024
The places and regulations for using amusement equipment, listen to the answer from Huajin Amusement...
We all know that amusement equ We all know that amusement equ
11 .08.2024
We all know that amusement equipment is designed for people to relax and have fun, but if there is n...
Introduction to amusement equi Introduction to amusement equi
11 .08.2024
Introduction to amusement equipment manufacturers: What to pay attention to when purchasing amusemen...
How to choose an inflatable ca How to choose an inflatable ca
11 .08.2024
How to choose an inflatable castle manufacturer? Amusement equipment manufacturers teach you how to ...

Leave Your Message